How To Make A Not Gate Circuit

How To Make A Not Gate Circuit: Simple Tutorial

Have you ever wanted to learn how to make a Not Gate circuit? If so, you’ve come to the right place! In this article, we’ll be breaking down the basics of how to make a Not Gate circuit.

A Not Gate circuit is a type of digital logic circuit, which is used to turn a digital signal “on” or “off” depending on the input signals for a given condition. This simple circuit is one of the most common and important circuits used in digital electronics, and can be used to create complex logic systems.

The first step in building a Not Gate circuit is to gather the required parts. You will need two transistors, an NPN and a PNP, resistors, and a diode. Once you have the necessary parts, you can begin constructing the circuit.

Begin by connecting the positive terminal of the power supply to the positive terminal of the transistor base. Then connect the negative terminal of the transistor base to the resistor. This will provide current to the transistor and will ensure that the transistor is switched “on”.

Next, connect the negative terminal of the diode to the emitter of the transistor and the positive terminal to the collector. This will help control the voltage flow through the transistor.

Finally, connect the emitter of the NPN transistor to the collector of the PNP transistor. This connection provides the output of the circuit. The output of the Not Gate circuit will be “on” if the input signal was “off”, and vice versa.

By following these steps, you should be able to construct your own Not Gate circuit with relative ease. While it may seem daunting at first, it’s actually not too difficult once you get the hang of it. With a little bit of practice, you’ll soon be able to design and build your own Not Gate circuits for all your digital logic needs!

Logic Gates Using Transistor Not And Or Pija Education