1997 Jeep Wrangler Ignition Switch Wiring Diagram

Do you own a 1997 Jeep Wrangler that needs an ignition switch wiring diagram? If so, you’re in luck. This article will cover the basics of this important wiring system and provide an easy-to-follow diagram to help you install or repair it with confidence.

First, let’s take a look at the parts you’ll need for the job. In addition to the ignition switch itself, you’ll need a 15 amp fuse, two terminals, a connector, two crimp terminals, a switch connector, and a handful of other hardware items. Once you have all the necessary supplies, you’re ready to get started.

The first step is to locate the ignition switch in your vehicle. This should be located somewhere along the steering column near the dashboard. Once you’ve located it, disconnect the negative battery terminal and then disconnect the wire harness from the switch. Next, remove the screws that secure the switch to the steering column.

Once the switch has been removed, it’s time to start wiring it up. Using the diagram provided, connect the two terminals on the switch to the appropriate wires. Start by connecting the green wire to the positive terminal and red one to the negative terminal. Then use the remaining wires to connect the other terminals.

Finally, test the ignition switch by turning the key. If the switch works properly, reconnect the switch harness and reattach the negative battery terminal. At this point, the wiring job is complete.

Having a reliable ignition switch is essential for keeping your vehicle running safely and efficiently. By following the steps outlined in this article and using the accompanying diagram, you can confidently tackle the wiring job yourself—saving time, money, and headaches. Good luck!

97 Tj Ignition Switch Diagram Needed Pirate 4x4